The Galleon G1 microRecorder is a powerful Gigabit Ethernet Recorder in an ultra small enclosure. It is designed to meet the most severe environmental conditions without compromising on functionality and performance.The G1 microRecorder is capable of capturing up to four Gigabit Ethernet ports at full line rate, at close to 120MB/s per Ethernet port. Fitted with up to 40TB of Industrial Grade MLC storage or up to 20TB Military Grade SLC storage, the removable data cartridges allows very short turnaround times between missions and easy transport of data between the vehicle or aircraft and the command station or lab where the data is analysed or distributed.With Galleon’s high performance data recorder software, the unit can be configured as a video over Ethernet or general UDP data recorder capable of streaming up to 500Mbytes/sec sustained.
The Galleon 40 Gigabit or 10 Gigabit Ethernet Data Recorder is a very compact, high performance, ready to run Ethernet Data Recorder. It is designed to meet the most severe environmental conditions without compromising on functionality and performance. Its SWaP optimized design makes it ideal for use in small Unmanned Aerial and Ground Vehicles, Flight Test Instrumentation, Surveillance, High Definition Video Applications, Sensor Development and Testing, etc.
The Galleon Gigabit Ethernet Recorder is a very compact, high performance, ready to run Gigabit Ethernet Recorder. It is designed to meet the most severe environmental conditions without compromising on functionality and performance. Its SWaP optimized design makes it ideal for use in small Unmanned Aerial and Ground Vehicles, Flight Test Instrumentation, Surveillance, High Definition Video Applications, Sensor Development and Testing, etc.
The Galleon Rugged HD Video Recorder is a very compact, high performance, HD Video Recorder and Playback System. It is designed to meet the most severe environmental conditions without compromising on functionality and performance. Its SWaP optimized design makes it ideal for use in small Unmanned Aerial and Ground Vehicles, Flight Test Instrumentation, Surveillance, High Definition Video Applications, Sensor Development and Testing, etc.
The Galleon Rugged Serial FPDP recorder offers superior performance in an ultra small form factor, and is capable of capturing up to four Serial FPDP channels at link speeds up to 4.25Gbaud. The extremely rugged and SWaP optimized design makes it ideal for deployed applications in unmanned aerial systems, test pods, ground vehicles, etc.
The Talon© High-Speed 200 MS/sec RF/IF Recording Systems are a turnkey multi-band recording and playback system used for recording and reproducing signals with bandwidths up to 80 MHz. It uses a 16-bit, 200 MHz A/D converter to provide real-time sustained recording rates to disk.
The Talon© High-Speed 500 MS/sec RF/IF Recording Systems are a turnkey multi- band recording and playback system used for recording and reproducing high bandwidth signals. It uses a 12-bit, 500 MHz A/D converter to provide real-time sustained recording rates to disk.
The Talon© High-Speed 1GS/sec RF/IF Recording Systems are a turnkey multi- band recording and playback system used for recording and reproducing signals with bandwidths up to 80 MHz. It uses a 12-bit, 1 GHz A/D converter to provide real-time sustained recording rates to disk.
The Talon© Ultra Wideband 3,6 GS/sec RF/IF Recording Systems are a turnkey multi- band recording and playback system used for recording and reproducing signals with bandwidths up to 80 MHz. It uses a 12-bit, 3,6 GHz A/D converter to provide real-time sustained recording rates to disk.
The Pentek Quartz™, Zynq UltraScale+ RFSoC family of products, embodies a streamlined approach to FPGA boards, simplifying the design to reduce power and cost, while still providing some of the highest performance FPGA resources available today.Designed to work with Pentek’s Navigator™ Design Suite tools, the combination of Quartz and Navigator offers users an efficient path to developing and deploying FPGA software and IP for data and signal processing.
Evolved from the proven designs of the Pentek Onyx® and Cobalt® families, Jade raises the processing performance with the new flagship family of Kintex UltraScale FPGAs from Xilinx. As the central feature of the board architecture, the FPGA has access to all data and control paths, enabling factory-installed functions including data multiplexing, channel selection, data packing, gating, triggering and memory control. The Jade Architecture organizes the FPGA as a container for data processing applications where each function exists as an intellectual property (IP) module.
The Flexor® line of FMC carriers and FMC modules combines the high performance of the Virtex-7 with the flexibility of the FMC data converter creating a complete radar and software radio solution.
As stand-alone processors, carrier boards provide an ideal development and deployment platform for demanding signal-processing applications. The carrier board architecture includes an optional built-in gigabit serial optical interface. Up to 12 high-speed duplex optical lanes are available on an MTP connector.
The Onyx®, Virtex-7 FPGA family uses the latest Xilinx FPGA technology to provide customers additional processing engines with the lowest power to address the insatiable demand of higher-speed A/Ds and D/As and tougher DSP algorithms. The Onyx modules use the same modular I/O interfaces as the popular Cobalt® family Virtex-6 FPGA, while boosting memory, logic and I/O performance. All Onyx boards are available in XMC, PCIe, 3U VPX, AMC and cPCI format.
Pentek’s Cobalt® family of Virtex-6 products provide the most advanced features in the FPGA market. In addition to the high-performance logic fabric, Virtex-6 FPGAs contain many built-in system-level blocks. These features allow logic designers to build the highest levels of performance and functionality into their FPGA-based systems. All Cobalt boards are available in XMC, PCIe, 3U VPX, AMC and cPCI format.
GateFlow® is Pentek’s flagship collection of FPGA Design Resources that utilize the Xilinx Virtex FPGA parts. GateFlow is available in two offerings:
GateXpress® improves and simplifies FPGA loading.
ReadyFlow® Board Support Packages (BSP) are designed to reduce development time not only during the initial stages, but any time new hardware is added to the system.
The Bandit® family of multiband, modular RF slot receivers accepts RF signals over the range of 800 MHz to 3 GHz, downconverting them to a 225 MHz IF signal suitable for A/D conversion by any of several signal acquisition modules. The Bandit series are an ideal solution for amplifying and downconverting antenna signals for communications, radar and signal intelligence systems.
The Galleon Titan Quad port 10 Gigabit Ethernet XMC offers high performance Ethernet for a wide range of applications. Based on the latest Intel XL710 (Forteville) 10GbE controller, the Titan Quad channel 10GbE XMC supports IEEE 1588 Precision Time Protocol (PTP), making it suitable for time critical applications.The XL710 offers the latest UDP, TCP and IP checksum offload.
The Galleon Titan Quad Port Optical Gigabit Ethernet XMC offers high performance Ethernet for a wide range of applications. Based on the Intel i350 quad port Gigabit Ethernet controller, the Titan Quad Gigabit Ethernet XMC supports IEEE 1588 Precision Time Protocol (PTP), making it suitable for time critical applications such as Flight Test. UDP, TCP and IP checksum offload is supported.
The Galleon Serial FPDP XMC is a flexible platform implementing a quad channel VITA 17.1-2003 sFPDP receive and transmit engine for high performance image processing, SIGINT/COMINT, radar processing, software defined radio, sensor data capture, etc. The sFPDP XMC has a low power Xilinx Virtex 6 LX75T FPGA, supporting up to four sFPDP links. Each link is individually configurable for 1.0625, 2.125, 2.5, 3.125 and 4.25Gbaud operation.
Concurrent Technologies’ range of 6U CompactPCI products provide the user with a choice of high performance, highly integrated Slot Controllers and Peripheral Controllers. These boards use Intel® processor platforms including 3rd generation Intel® Core™ i7 processors. Many of the products are available in commercial and extended temperature variants.
3U CompactPCI continues to be a very popular architecture, in particular for transportation and defence applications. Concurrent Technologies’ offers a range of commercial and ruggedized processor boards based on high performance processors such as the 4th generation Intel® Core™ processors, or the low power Atom™ processors
Concurrent Technologies offers a choice of VME processor boards which optionally support a VXS interface using either PCI Express® or Gigabit Ethernet fabric. These high performance processor boards are complemented by a choice of Switch Fabric boards, Ethernet switch, PMC carrier, and mass storage modules.
Concurrent Technologies offers a choice of 3U VPX processor boards based on high performance processors such as the 4th generation Intel® Core™ processors
Concurrent Technologies’ AMC modules are suitable for applications such as wireless base stations, VOIP, media-servers, blade servers, test and measurement systems and security applications.
Concurrent Technologies offers a wide range of XMC and PMC modules that are suitable for commercial and rugged deployments.
The Galleon microServer is a full fea- tured server in an extremely small enclosure. The Size Weight and Power (SWaP) optimized design makes it ideal for use in small Un- manned Aerial and Ground Systems as well as other space and power constrained applications.
Four Gigabit Ethernet ports makes the unit ideal for Network Attached Storage (NAS) applications. In many cases, the high number of Ethernet ports eliminates the need for external switches. The removable storage subsystem offers up to 5 TB of Industrial grade MLC storage or up to 2 TB Military grade SLC storage, supporting JBOD and RAID modes 0 and 1.
The Galleon High Performance Mission Computer is based on the latest generation of Intel Core-i7 processors and chipsets. The rugged system represents a breakthrough in ultra small, high performance data processing. With its flexible architecture and only 156 x 175 x 103 mm external dimensions it is unmatched in the industry.
Galleon Embedded Computing offers a range of ultra small rugged Network Attached Storage (NAS) servers. Built on the same hardware platform as the SWaP optimized, high performance, Rugged Data Recorders, the rugged NAS offers flexible storage in harsh environments. Removable storage ensures short ground times for airborne applications. Industry standard solid state drives are used to benefit from the ever increasing storage densities and cost reductions as the technology evolves.
The XSR Server is a high performance server for the most demanding deployed applications. It is designed to meet the most severe environmental conditions without compromising on functionality and performance. It’s high performance allows server virtualization in size constrained applications where this was previously unheard of. The SWaP optimized design makes it ideal for use in small Unmanned Aerial and Ground Systems as well as large manned aircraft and vehicles.
The Galleon Quad Xeon is a high-performance server for deployed applications, utilizing XEON E3 processing cores.The Quad Xeon server uses a common architecture philosophy to other Galleon products. COTS Open Architecture modules are used to provide multiple processor nodes and up to 80TB Removable Memory in an industry standard ATR enclosure. Each processor node provides an Intel Embedded processor and its accompanying SDRAM resource. The processor nodes are interlinked to allow for data to be transferred between each other quickly and efficiently. A standard I/O configuration including Ethernet, Serial, GPIO, Graphics & USB is available – which can be further enhanced using multiple mezzanine expansion sites. These can be used to add specific I/O for each application – such as MIL-STD-1553B, ARINC429, CanBus, Video, FPGA processing and more.
The Condor product line offers high performance COTS XMC form factor graphics and video solutions for millitary /avionics and aerospace markets.
The Condor product line offers high performance COTS VPX form factor graphics and video solutions for millitary /avionics and aerospace markets.
The Condor XMC/VPX video capture products offer high resolution video capture, both in raw and H.264 formats. AMD and NVIDIA GPUs supporting OpenCL and CUDA are available for GPGPU applications.
System integration is more than just putting computer boards into a chassis. Software drivers, interfaces, power and thermal management, ruggedization are examples for challenges in that context. Our engineers have massive expereince in designing and integrating system level solutions. In the beginning of a project we build a close team with our customers and understand the application and requirements.